Seat Pan Cover And Cushion, Removing And Installing, Seat Pan Without Seat Depth Adjuster: Removing
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the front seat:
- Manual standard seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Power Standard Seat and Comfort Seat. Refer to POWER FRONT SEAT, REMOVING AND INSTALLING .
-- Attach the front seat to the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest:
- Manual standard seat. Refer to FRONT BACKREST, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .
- Power Standard Seat and Comfort Seat. Refer to FRONT BACKREST, REMOVING AND INSTALLING, POWER STANDARD SEAT .
-- Remove the retaining bracket for the sill-side trim:
- Manual standard seat. Refer to RETAINING BRACKET FOR SILL-SIDE TRIM, REMOVING AND INSTALLING, MANUAL STANDARD SEAT, SPORT SEAT, SUPER SPORT SEAT .
- Power Standard Seat and Comfort Seat. Refer to RETAINING BRACKET FOR SILL-SIDE TRIM, REMOVING AND INSTALLING, POWER STANDARD SEAT .
-- Versions with LATCH child seat anchor (front passenger seat only): remove the LATCH child seat anchor. Refer to FRONT CHILD SEAT ANCHOR, REMOVING AND INSTALLING .
-- Equipment level with storage compartment: remove the storage compartment. Refer to FRONT CENTER CONSOLE STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Disconnect the electrical connectors and free them up.
-- Disengage the clamping profiles -3- on the cover using the :3370 in the front and on the side -A and B-.
-- When disengaging the cover, be careful of the exposed retaining hooks -1- on the edge -2-.
-- Disengage both tab hooks -1- on the seat pan -3-.
- LATCH child seat anchor -2- removed.
-- Disengage the clamping profile -6- on the cover using the :3370 near -A-.
-- When disengaging the cover, be careful of the exposed hooks -4- on the edge -5-.
-- Remove the cover and cushion from the seat pan while guiding the seat heating wiring harness at the same time.