LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A5 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 399 (Hybrid Battery System (Diagnostic Codes (P0A75-123 - U029A-123))) >> Hybrid Battery System >> DTC P0AFC-123: Hybrid Battery Pack Sensor Module [08/2013 - ] >> Confirmation Driving Pattern

Confirmation Driving Pattern

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the Techstream to the DLC3.
  2. Turn the power switch on (IG) and turn the Techstream on.
  3. Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).
  4. Turn the power switch off.
  5. Turn the power switch on (READY) and turn the Techstream on.
  6. Perform the universal trip.
  7. Enter the following menus: Powertrain / Hybrid Control / Trouble Codes.
  8. Check that permanent DTCs are cleared.

    HINT: 

    • If a permanent DTC is output, the system is malfunctioning.
    • If no permanent DTC is output, the system is normal.
scientia non olet · About LEMON Manuals