Engine, Supporting In Installation Position

Special Tools And Workshop Equipment Required 

• Engine Support Bridge:10-222A 

Supporting 

Fig 1: Installing 10 - 222 A With 10 - 222 A /3 On Left And Right Strut Towers

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Position the :10-222A  with the :10-222A/3  on the left and right fender bolting edges as shown.

-- Engage the :10-222A/11  on the engine lifting eye.

-- Lightly pretension the engine with the spindles.