Tightening Specifications
NOTE:
The tightening specifications only apply to lightly greased, oiled, phosphated or blackened nuts and bolts.
Additional lubricants, such as engine or transmission oil are permissible, although lubricants containing graphite are not.
Do not use any ungreased parts.
Tightening specification tolerance: ±15%.
| Component | Nm | ||
|---|---|---|---|
| Bolts and nuts | M6 | 9 | |
| M8 | 20 | ||
| M10 | 40 | ||
| M12 | 65 | ||
- Refer to OVERVIEW - SUBFRAME MOUNT
- Engine on the manual transmission or dual clutch transmission to the engine. Refer to TRANSMISSION, INSTALLING .
- Engine to multitronic. Refer to TRANSMISSION TIGHTENING SPECIFICATIONS (0AW) .