Engine, Securing To Engine And Transmission Holder: Notes
Special tools and workshop equipment required
- Holding Fixture :VW540
- Engine and Transmission Holder :VAS6095A
- Engine Sling :2024A
- Shop Crane :VAS6100
- Engine engaged with the :2024A on the :VAS6100
- To be aligned to the center of gravity of the assembly, the rails with holes of the lifting hooks must be inserted as shown.
CAUTION:
There Is a Risk of Injury from the Lifted Engine Falling
Parts of the body could be crushed.
- Secure the mounting hooks and pins on the lifting tackle with a securing pin.
-- Remove the drive plate. Refer to DRIVE PLATE, REMOVING AND INSTALLING .
-- For the assembly work secure the : VW540 on the engine.
-- Secure the engine with the :VW540 on the :VAS6095A .