Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes
Special Tools And Workshop Equipment Required
- Puller - Valve Seal :3364
- Seal Installer - Valve Stem :3365 or (depending on the version/manufacturer of the valve stem seal)
- Fitting Tool :T40376/1
- Valve Keeper Tool Kit :VAS5161A
- Valve Cotter Tool Kit - Guide Plate 19C :VAS5161/19C
- Engine and Transmission Holder :VAS6095A
- Cylinder Head Tensioning Device :VAS6419
- Mounting Sleeve. Refer to Parts information.