Compression, Checking: Notes
Special Tools And Workshop Equipment Required
- Spark Plug Removal Tool :3122B
- Compression Tester Kit :VAG1763
- Compression Tester Kit - Adapter :VAG1381/1
Test Sequence
- Engine oil temperature at least 30 °C (86 °F).
- Battery voltage at least 12.7 V.
-- Remove the ignition coils with power output stages. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
-- Remove the spark plugs using the :3122B .
-- Check the compression using the :VAG1763 , :VAG1381/1 and :VAG1381/5A . Information on using the tester. Refer to the Operating Instructions.
- The help of a second technician is necessary for the following step.
-- Have a second technician operate the starter until the tester no longer shows an increase in pressure.
| Compression Pressure | Pressure |
|---|---|
| New | 11.0 to 14.0 bar (159.54 to 203.05 psi) |
| Wear limit | 7.0 bar (101.52 psi) |
| Maximum difference between cylinders | 3.0 bar (43.51 psi) |