Bearing Bracket, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -arrows- and tighten them. Tightening specifications. Refer to -item  ) OVERVIEW - CYLINDER HEAD.

-- Lubricate the hole -arrow- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

• Carefully mount the bearing bracket without tilting it.

  Courtesy of AUDI OF AMERICA, LLC

-- Attach the bearing mount and install the bolts -arrows- all the way by hand.

-- Depending on the version, remove either the :T40011  or the :T40267  .

-- Tighten the bearing bracket bolts -arrows-. Refer to OVERVIEW - CAMSHAFT TIMING CHAINS .

Installation Is Performed In Reverse Order Of Removal, Noting The Following: 

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- There may be additional procedures depending on the model. Refer to BEARING BRACKET, REMOVING AND INSTALLING / CHAIN DRIVE .