Checking Piston Bore
-- Measure approximately 15 mm from the lower edge at a 90° angle to the piston pin axis using a 75 to 100 mm external micrometer.
- Deviation from specified size: maximum 0.04 mm
| Piston Diameter | ||
|---|---|---|
| Standard dimension | mm | 82.42 1) |
|
||
-- Measure approximately 15 mm from the lower edge at a 90° angle to the piston pin axis using a 75 to 100 mm external micrometer.
| Piston Diameter | ||
|---|---|---|
| Standard dimension | mm | 82.42 1) |
|
||