Overview - Crankcase Ventilation: Notes
- Bleed Pipe
- O-ring
- No replacement part
- Seal
- No replacement part
- Oil Separator
- On the cylinder head cover
- Removing and installing. Refer to OIL SEPARATOR, REMOVING AND INSTALLING, ON CYLINDER HEAD COVER
- Bolt
- Tightening Specifications and Sequence. Refer to TIGHTENING SPECIFICATIONS .
- Seal
- Always replace if damaged
- Seal
- Always replace after removing
- Oil Separator
- On cylinder block
- Removing and installing. Refer to OIL SEPARATOR, REMOVING AND INSTALLING
- Bolt
- Tightening specification and sequence. Refer to TIGHTENING SPECIFICATIONS .