After-Run Coolant Pump -V51-, Removing And Installing, Version 2: Removing

-- Loosen the hose clamps -arrows- and remove the air duct hose.

Fig 1: Air Intake Hose Components

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Lay a cloth below the coolant pipe to catch escaping coolant.

-- Clamp off and remove the coolant hoses -arrows- with :3094 .

Fig 2: Identifying After-Run Coolant Pump Electrical Connector

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Remove the bolt -1- and the After-Run Coolant Pump -V51-.