Brake Rotor, Removing And Installing, Ceramic Brakes 1LW: Installing

-- Clean the contact surfaces on the wheel hub and brake rotor. Remove any corrosion.

-- Place the brake rotor on the hub.

NOTE:

When positioning the brake rotor, do not tilt it on the wheel hub.

-- Install the bolt -6- and tighten it to 5 Nm.

Fig 1: Exploded View Of Front Brake Caliper Assembly, Ceramic Brakes

Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake caliper.

-- Install The Wheels.

Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

CAUTION:

Make sure the brakes are working correctly before driving the vehicle for the first time.