Brake Caliper, Removing And Installing, 1LT And 1LY: Removing

Special Tools And Workshop Equipment Required 

• Torque Wrench 1332 40-200 Nm :VAG1332 
• Torque Wrench 1332 Insert - Reversible Ratchet:VAG1332/1 

-- Raise The Vehicle.

-- Remove the wheels.

-- Remove the brake hose from the bracket.

-- Disconnect the brake wear indicator on the left brake caliper.

-- Remove the bolts -5- from the brake carrier.

Fig 1: Identifying Brake Caliper Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the brake carrier with brake pads and the brake caliper.

Do not let the brake caliper with the brake carrier hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.