LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A4 Prestige >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Final Drive & Differential - MULTITRONIC Transmission 0AW (Sedan) (As Of 11.2014) >> 39 Final Drive, Differential >> Seals >> Input Shaft Seal, Replacing

Input Shaft Seal, Replacing

Procedure 

NOTE:

The input shaft seal can only be replaced for removed transmissions.

-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .

-- Replace the input shaft seal. Refer to INPUT SHAFT SEAL, REPLACING .

-- Refer to ATF LEVEL, CHECKING after installing the transmission.