Front Noise Insulation Removing And Installing

Removing 

Fig 1: Identifying Bolts -Arrows-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the bolts -arrows- for the front wheel housing liner connection -1- and the front wheel spoiler.

Fig 2: Identifying Bolts -Arrows- For Front Wheel Housing Liner Connection -1-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the quick release -arrows-.

-- Remove the front noise insulation -1- toward the rear and out of the lower section of the bumper cover.

• The guide tabs for the front noise insulation will disengage while doing this.

-- Remove the front noise insulation.

Fig 3: Identifying Quick Release -Arrows- And Front Noise Insulation -1-

Courtesy of AUDI OF AMERICA, LLC

Installing 

• Tightening specification. Refer to OVERVIEW - NOISE INSULATION, AUDI RS 4 .

Install in reverse order of removal.