Overview - Rear Outer Three-Point Seat Belt
NOTE:
The illustration shows a three-point seat belt in a sedan.
- Bolts
- Do not change the bolt position when removing and installing the belt guide. It is set by the manufacturer.
- Rear Outside Belt Guide
- Replace the entire belt guide if damaged.
- Removal and installation: sedan REAR SEAT BELT GUIDE, REMOVING AND INSTALLING, SEDAN ; Avant OUTER REAR BELT GUIDE, REMOVING AND INSTALLING, AVANT
- Bolt
- 45 Nm
- If it was removed because of an accident, replace the bolt
- Nut
- Automatic Belt Retractor
- Depending on the market version with Driver Side Rear Seat Belt Tensioner Igniter -N196-
- Depending on the market version with Passenger Side Rear Seat Belt Tensioner Igniter -N197-
- Removal and installation: for sedan refer to REAR THREE-POINT SEAT BELT, REMOVING AND INSTALLING, SEDAN ; for Avant refer to REAR THREE-POINT SEAT BELT, REMOVING AND INSTALLING, AVANT .
- Noise Insulation
- For the automatic belt retractor
- Connector
- Depending on the market version for Driver Side Rear Seat Belt Tensioner Igniter -N196-
- Depending on the market version for Passenger Side Rear Seat Belt Tensioner Igniter -N197-
- Bolt
- 45 Nm
- If it was removed because of an accident, replace the bolt
- Outer Rear Belt End Fitting
- Removing and installing. Refer to REAR OUTER BELT END FITTING, REMOVING AND INSTALLING .