Overview - Rear Center Three-Point Seat Belt
NOTE:
Both folding and fixed rear seat backrests are shown in the illustrations.
- Rear Center Belt Anchor
- Removing and installing. Refer to REAR SEAT BELT LATCH, REMOVING AND INSTALLING, RIGHT REAR SEAT BELT LATCH WITH REAR BELT END FITTING IN THE CENTER .
- Bolt
- Tightening specification, refer to OVERVIEW - REAR SEAT BELT LATCH .
- Rear Center Belt Guide
- For versions equipped with a fixed rear seat backrest
- Replace the entire belt guide if damaged.
- Removing and installing. Refer to REAR SEAT BELT GUIDE, REMOVING AND INSTALLING, CENTER REAR SEAT BELT GUIDE, FIXED REAR SEAT BACKREST .
- Connector
- Market-specific: with Center Rear Seat Belt Tensioner Igniter -N198-
- Automatic Belt Retractor
- For versions equipped with a fixed rear seat backrest
- Market-specific: with Center Rear Seat Belt Tensioner Igniter -N198-
- Removing and installing. Refer to REAR THREE-POINT SEAT BELT, REMOVING AND INSTALLING, CENTER REAR THREE-POINT SEAT BELT, FIXED REAR SEAT BACKREST .
- Bolt
- 45 Nm
- If it was removed because of an accident, replace the bolt
- Rear Center Belt Guide
- For vehicles equipped with a folding rear seat backrest
- Replace the entire belt guide if damaged.
- Removing and installing. Refer to REAR SEAT BELT GUIDE, REMOVING AND INSTALLING, CENTER REAR SEAT BELT GUIDE, FOLDING REAR SEAT BACKREST .
- Connector
- Market-specific: with Center Rear Seat Belt Tensioner Igniter -N198-
- Automatic Belt Retractor
- For vehicles equipped with a folding rear seat backrest
- Market-specific: with Center Rear Seat Belt Tensioner Igniter -N198-
- Removing and installing. Refer to REAR THREE-POINT SEAT BELT, REMOVING AND INSTALLING, CENTER REAR THREE-POINT SEAT BELT, FOLDING REAR SEAT BACKREST .
- Nut
- 45 Nm
- If it was removed because of an accident, replace the nut