LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 86 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Coupe)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Input Shaft >> Inserting Spring Into Selector Gear

Inserting Spring Into Selector Gear

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2016 Audi S5, 2015 Audi S5, 2014 Audi S5, 2013 Audi A5, and 2012 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

The bent end of the spring -arrow- must be hooked into the hole in the selector gear.

Fig 1: Inserting Spring Into Gear
GWWV35-1036Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals