LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 168 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Cabriolet)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft >> Flange Shaft Mounting Needle Bearing, Driving In Flush In The Output Shaft

Flange Shaft Mounting Needle Bearing, Driving In Flush In The Output Shaft

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driving In Flange Shaft/Pinion Needle Bearing Flush
GWWV35-1521Courtesy of AUDI OF AMERICA, LLC

Install needle bearings with the lettering on the bearing (the side with thicker metal) facing towards 3013.

scientia non olet · About LEMON Manuals