Headlamp Range Control Adjuster -E102-, REMOVING AND INSTALLING: Removing

Fig 1: Removing/Installing Headlamp Light Switch Trim

Courtesy of AUDI OF AMERICA, LLC

-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Remove the gap cover for the instrument cluster. Refer to INSTRUMENT CLUSTER GAP COVER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the light switch trim -1-.

-- Disconnect the connector for the Light Switch -E1-.

-- Press the release button and disconnect the connector -1- from the Headlamp Range Control Adjuster -E102-.

Fig 2: Disconnect The Electrical Connector -1- From The Headlamp Range Control Adjuster -E102- By Pressing The Release Button

Courtesy of AUDI OF AMERICA, LLC

-- Carefully release the retaining hooks -arrows- using a small screwdriver.

-- Remove the Headlamp Range Control Adjuster -E102- -item 2- from the light switch trim.