Overview - Cover And Padding, Bench Seat With Center Storage Compartment

Fig 1: Overview Of Bench Seat With Center Storage Compartment

Courtesy of AUDI OF AMERICA, LLC

1. Cover
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
2. Molding
   • sewn into cover
   • for engaging the cover in the rear and side channel at the center armrest
3. Contour Wire
   • Pushed into the cover
4. Molding
   • Sewn into cover
   • For engaging the cover in the seat bench frame
5. Left/Right Padding
   • Removing and installing. Refer to COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT .
   • Separate the cover from the padding. Refer to COVER AND PADDING, SEPARATING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
6. Center Storage Compartment
   • Separating the cover from the center storage compartment:
     • Right cover COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
     • Left cover COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT 
   • Removing and installing. Refer to CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .
7. Clip
   • Covered in foam padding
   • Only with fabric covers
8. Clip
   • Covered in foam padding
9. Seat Bench Frame
10. Cushion Clip
    • Only with leather covers
    • For securing the cover to the padding
    • Always replace if removed
    • Install in same location as before removal