Overview - Balance Shaft And Oil Pump Drive Chain
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Crankshaft
- Power Take-Off Drive Chain
- Mark the running direction with paint for reinstallation
- Removing and installing. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
- Drive Sprocket for Oil Pump
- Installed position: the side with lettering on it faces the engine
- Bolt
- 30 Nm +90° turn
- Replace
- Pressure Spring
- Bolt
- 15 Nm +90° turn
- Replace
- Balance Shaft Chain Sprocket
- Installed position: the side with lettering on it faces the transmission
- Chain Tensioner
- With glide track
- Bolt
- 10 Nm +45° turn
- Replace