LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1376 (Lubrication (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet)) >> Lubrication >> Crankcase Ventilation >> Oil Separator, Removing And Installing >> Oil Separator, Removing And Installing. On Cylinder Block >> Removing

Oil Separator, Removing And Installing. On Cylinder Block: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Preliminary work may be required depending on the model. Refer to CRANKCASE VENTILATION  .

-- Remove the bolts -1 through 9- and remove the oil separator.

Fig 1: Oil Separator Loosening Sequence
GWWA17-10423Courtesy of AUDI OF AMERICA, LLC

TIP: 

To prevent dirt from entering the lubrication system, seal the opening in the engine with a clean cloth.

scientia non olet · About LEMON Manuals