Coolant, Draining And Filling: Draining

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

WARNING:

The cooling system is under pressure when the engine is warm. Risk of scalding due to hot steam and hot coolant.

Scalding the skin and other parts of the body is possible.

Wear safety gloves.
Wear protective eyewear.
Reduce the pressure by covering the coolant expansion tank cap with a cloth and carefully opening it.

-- Open the coolant expansion tank cap.

Fig 1: Coolant Reservoir for Audi Q5

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation. Refer To NOISE INSULATION, REMOVING AND INSTALLING .

-- Place the :VAS6208 Under The Engine.

Fig 2: Identifying Coolant Drain Plug

Courtesy of AUDI OF AMERICA, LLC

-- Remove The Drain Plug -1- And Allow The Coolant To Drain.

Vehicles With Transmission Fluid Heater

Fig 3: Coolant Hoses And Hose Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Loosen The Hose Clamps -1, And 2- And Drain The Coolant To Remove The Coolant Hoses.

All Vehicles:

NOTE:

Secure All Hose Connections With Hose Clamps That Match The Ones Used In Series Production.

-- Close The Drain Plug.

-- Reconnect The Coolant Hoses.

COOLANT SPECIFICATION

All Information Is Described. Refer To COOLANT, DRAINING AND FILLING .