LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1188 (Cooling System [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB] (Coupe)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Engine Coolant Temperature Sensor -G62-, Removing And Installing >> Installing

Engine Coolant Temperature Sensor -G62-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2013 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Additional Procedures: 

NOTE:

Secure All Hose Connections With Hose Clamps That Match The Ones Used In Series Production.

-- Install The Throttle Valve Control Module -J338-. Refer To THROTTLE VALVE CONTROL MODULE -J338-, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals