Upper Timing Chain Cover Seal

Special tools and workshop equipment required 

• Arbor VW 195
• Tube 60 mm Dia. VW 415 A
• Seal Installer 3241/4

Procedure 

Fig 1: Driving Out Sealing Ring

Courtesy of AUDI OF AMERICA, LLC

-- Remove timing chain guard upper section. Refer to UPPER TIMING CHAIN COVER .

-- Drive out the seal using the VW 195 -arrow-.

-- Support the sealant-free upper timing chain guard and with molded tabs -arrows- on a secure backing and press in the new seal all the way using the 3241/4.

Fig 2: Driving In Seal

Courtesy of AUDI OF AMERICA, LLC

-- Install timing chain guard upper section. Refer to UPPER TIMING CHAIN COVER .