Tail Lamps Overview

Observe notes on contact corrosion Refer to CONTACT CORROSION .

Fig 1: Tail Lamps Overview

Courtesy of AUDI OF AMERICA, LLC

1. Retaining Bolts
   • Bolted in housing.
2. Rear Turn Signal Bulb
   • Left rear turn signal lamp -M6-
   • Right rear turn signal lamp -M8-
   • 12V, 18 W
   • W16W
   • Bulb, replacing, refer to TAIL LAMP BULB CARRIER .
3. Bulb
   • Left rear turn signal lamp -M6-
   • Right rear turn signal lamp -M8-
   • 12V, 18 W
   • W16W
   • Bulb, replacing, refer to TAIL LAMP BULB CARRIER .
4. Bulb For The Rear Brake/Tail/Side Marker Lamps
   • 12V, 21 W
   • Replacing, refer to TAIL LAMP BULB CARRIER .
5. Screw
   • 1.7 Nm
6. Bulb Holder
   • Removing and installing, refer to TAIL LAMP BULB CARRIER .
7. Bulb For The Rear Brake/Tail/Side Marker Lamps
   • 12V, 21 W
   • Bulb, replacing, refer to TAIL LAMP BULB CARRIER .
8. Left Back-Up Lamp
   • Left back-up lamp -M16-
   • Right Back-Up Lamp -M17-
   • 12V, 18 W
   • W16W
   • Bulb, replacing, refer to TAIL LAMP BULB CARRIER .
9. Tail Lamp
   • Removing and installing, refer to TAIL LAMP .
10. Threaded Studs
    • 3.5 Nm