LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S8 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> (55 Hood, Lids) >> Hood >> Hood Catch, Removing And Installing >> Striker Pin, Adjusting

Striker Pin, Adjusting

Procedure 

Fig 1: Adjusting Striker Pin
GWWA55-10750Courtesy of AUDI OF AMERICA, LLC

-- Unclip and remove the front and rear cover -1- to adjust the height.

-- Use both nuts -arrows- to adjust.

-- Line up both nuts with the indentation in the cover.

-- Mount the cover and install the hood catch.

scientia non olet · About LEMON Manuals