Input Shaft Seal, Replacing, 0BC: Notes
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2014 Audi S6, 2014 Audi A6 Quattro, and 2013 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- PullerVW 391
- AdapterVW 771/40 from the Slide Hammer-Complete SetVW 771.
- Retainer3028
- PullerT10055
- AdapterT10055/2
- Thrust PieceT40109
- Assembly ToolT40222/1
- Sealing GreaseG 052 128 A1
- two bolts M 8 x 30
- One M 8 x 45 bolt