Final Drive 0BF Overview
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2014 Audi S6, 2014 Audi A6 Quattro, and 2013 Audi S6. However, it is still accessible from the selected car via links, so may be relevant.
- Subframe
- Removing and installing, refer to SUBFRAME
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Left Drive Axle
- Removing and installing, refer to DRIVE AXLE
- Bolt
- 20 Nm
- Heat Shield
- Rear Final Drive
- Removing and installing, refer to FINAL DRIVE
- Additional work after replacing the rear final drive. Refer to ADDITIONAL WORK AFTER REPLACING REAR FINAL DRIVE 0BE, 0BF
- Driveshaft
- Overview, refer to DRIVESHAFT, MOUNTED ON TRANSMISSION SIDE OVERVIEW or DRIVESHAFT, BOLTS ON TRANSMISSION SIDE OVERVIEW
- Removing and installing, refer to DRIVESHAFT, DRIVESHAFT CONNECTED ON TRANSMISSION SIDE or DRIVESHAFT, DRIVESHAFT BOLTED ON TRANSMISSION SIDE .
- Right Drive Axle
- Removing and installing, refer to DRIVE AXLE .