Battery -A- OVERVIEW
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S6, 2015 Audi A6 Quattro, 2015 Audi A6, 2014 Audi S6, and 2014 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Observe notes on contact corrosion. Refer to CONTACT CORROSION .
- Retaining Bracket
- Screw
- 18 Nm
- Battery
- Disconnecting and connecting, refer to Battery -A-, DISCONNECTING AND CONNECTING .
- Removal and installation, refer to Battery -A-
- Screw
- Nut
- 5 Nm
- Main Fuse Panel
- Disconnecting and connecting, refer to Battery -A-
- Overview, refer to PLENUM CHAMBER E-BOX, WIRE JUNCTION, FUSE HOLDER AND BATTERY OVERVIEW
- Negative Terminal Cover
- Positive Terminal Cover
- Retainer
- For the vehicle tool kit cover
- Screw
- 18 Nm
- Quantity: 4
- Electrical Wire
- For the battery monitoring control module -J367-
- Follow the sequence when connecting the ground cable, refer to Battery -A-, DISCONNECTING AND CONNECTING
- Ground Wire With Battery Monitoring Control Module -J367-
- Disconnecting and connecting, refer to Battery -A-, DISCONNECTING AND CONNECTING
- Removal and installation, refer to GROUND CABLE WITH Battery Monitoring Control Module -J367-
- Nut
- Tightening specification, refer to appropriate SYSTEM WIRING DIAGRAMS information.
- Screw
- Nut
- 5 Nm
- Central Venting System Hose
- Grommet
- For the hose for the central venting system