LEMON Manuals: Even more car manuals for everyone

Home >> Audi >> 2013 >> S7 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> (55 Hood, Lids) >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Gas-Filled Strut, Installing

Gas-Filled Strut, Installing

Fig 1: Identifying Ball Sockets

GWWA55-10736

Courtesy of AUDI OF AMERICA, LLC

-- The gas-filled struts may only be installed on the ball pins over the ball sockets -arrows-.

scientia non olet · About LEMON Manuals