Gas-Filled Strut, Disposing: Notes
WARNING:
- Follow the safety regulations.
- Separation work should be done by qualified personnel only.
- Insert the pressure spring into a prismatic jaw vise with a Single Hand Angle Grinder VAS 5167 before cutting through.
- When cutting through the spring coils, a sudden impact will occur.
- The gas-filled strut can be disposed of only after the tension of the compression spring has been reduced to zero.
Special tools and workshop equipment required
- Window Cutter VAG 1561A
- Window Cutter - Saw Blade - 83 mm VAG 1561/26
- Single Hand Angle Grinder VAS 5167