LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S7 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> (55 Hood, Lids) >> Hood >> Release Cable, Removing And Installing >> Routing the Release Cable Inside the Passenger Compartment

Routing the Release Cable Inside the Passenger Compartment

Fig 1: Identifying Release Cable & Grommet
GWWA55-10714Courtesy of AUDI OF AMERICA, LLC

-- Route the release cable -2- along the >>A-pillar<< as shown.

-- Press the grommet -1- onto the >>A-pillar<< from the interior.