Charge Air Pressure Sensor -G31- / -G447-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A6 Quattro, 2014 Audi A6 Quattro, 2013 Audi A6, and 2012 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

Cylinder Bank 2 (Left):

Fig 1: Identifying Vacuum Hose -1-, Bolts -Arrows- And Cover -2-

Courtesy of AUDI OF AMERICA, LLC

-- Free up the vacuum hose -1-.

-- Remove the screws -arrows- and remove the cover -2-.

Continued for Both Sides:

Fig 2: Installation Location Charge Air Pressure Sensor -G31- /Intake Manifold Temperature Sensor -G72-

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Remove the bolts -arrows- and remove the charge air pressure sensor.