LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1774 (1.8L & 2.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 15 Cylinder Head, VALVETRAIN >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Components Fastener Size Nm
Heat shield bolt - 9
Connecting piece for coolant hose bolt - 9
Cylinder head bolt1 - Notes2, 3
Engine lifting eye bolt1 - 8 + 90°
Camshaft Adjustment Valve 1 -N205- bolt1 - 4 + 45°
Oil dipstick tube bolt - 9
Chain Tensioner bolt1 - 4 + 90°
Timing chain tensioning rail guide pin - 20
Camshaft timing chain glide rail guide pin - 20
Bearing bracket bolt1 - 4 + 180°
Glide rail guide pin - 20
Chain tensioner - 85
EVAP Canister Purge Regulator Valve 1 -N80- bracket bolt - 9
Engine cover ball pin - 9
Bearing Bracket bolts1 M6 8 + 90°
M8 20 +90°
  • 1 : Replace after removing.
  • 2 : Follow the procedure when loosening, refer to Figure.
  • 3 Follow the procedure when tightening, refer to Figure.
scientia non olet · About LEMON Manuals