LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1743 (1.8L, 2.0L & 2.5L - Fuel Supply & Engine Code(S): CBFA, CBTA, CBUA, CCTA, CPKA, CPLA, CPPA & CPRA (Hatchback)) >> 20 Fuel Supply >> Description And Operation >> Connector Couplings, Separating >> Version 7

Version 7

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connector Coupling With Right And Left Unlock Buttons
GWWA20-10880Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling -1- with right and left unlock buttons -2- :

Opening

-- Press the connector coupling -1- in direction of -arrow A- and hold it down.

-- Push the release buttons -2- in direction of -arrow B- and remove the connector coupling -1-.

Follow the color coding when installing. Refer to Coupling Allocation .

The connector couplings must >>audibly<< engage when locking.

-- Pull on the connector coupling to make sure it is secure.