Gas-Filled Strut, Removing And Installing: Notes
- Gas-Filled Strut
- Disengage. Refer to Disengaging the Gas-Filled Strut .
- Only with manual rear lid release
- Rear Lid Hinge
- Ball Stud
- No replacement part
- Ball Stud
- 21 Nm
- Cover
-- Press it onto the spring from the side.
-- Push the cover forward and lock it onto the hinge bolt.
- Spring
- Pay attention to the when attaching it, refer to HOOD GAS-FILLED STRUT, REMOVING AND INSTALLING .