LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> S6 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> 55 Hood, Lids >> Rear Lid, AVANT >> Overview - Stop And Adjusting Buffer >> Adjusting Buffer Installed Position

Adjusting Buffer Installed Position

Fig 1: Identifying Adjustment Buffer Installation Position
GWWA55-10456Courtesy of AUDI OF AMERICA, LLC
  1. Rear Lid
    • When adjusted correctly, adjusting buffer -3- must contact stop buffer -2- with light pretension when rear lid is closed.
  2. Stop
  3. Adjusting Buffer
    • There is an adjusting screw for adjusting the height.
    • When rear lid is adjusted correctly, adjusting buffer must make contact with light pre-tension with stop on rear lid side.
  4. Side Panel
scientia non olet · About LEMON Manuals