Removal And Installation: Flywheel: Removing

Fig 1: Identifying T40176, Torque Converter -A-, And Nut -B-

Courtesy of AUDI OF AMERICA, LLC

Secure the transmission to the VAS 6095. Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .

-- Remove the left flange shaft. Refer to LEFT FLANGE SHAFT .

-- Attach the T40176 to the flywheel -A- with nut -B- -arrow-.

-- Rotate the T40176 upward.

Fig 2: Rotating T40176 Upward

Courtesy of AUDI OF AMERICA, LLC

NOTE:

To prevent the flywheel from tilting, counter hold it underneath as illustrated.

-- Remove the flywheel from the input shaft -arrow-. Do not tilt the flywheel when doing this.