Overview - Glove Compartment
NOTE:
The Illustration Shows The Glove Compartment On Vehicles Without Knee Airbags. Knee Airbag Deviations For Different Countries. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING, VEHICLE WITH KNEE AIRBAGS .
- Glove Compartment Lamp -W6-
- Removing and Installing. Refer to GLOVE COMPARTMENT LAMP -W6-, REMOVING AND INSTALLING .
- Footwell Lamp
- Removing and installing. Refer to LEFT/RIGHT REAR FOOTWELL LAMP :W45/ -W46-, REMOVING AND INSTALLING , Left Front Footwell Illumination Bulbs -L151- /Right Front Footwell Illumination Bulbs -L152-, Removing and Installing
- Front Passenger Side Instrument Panel Cover
- Removing and installing. Refer to FRONT PASSENGER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .
- Bolt
- 3 Nm
- Hinge Pin
- For Securing The Glove Compartment Cover
- Rubber Buffer
- For The Glove Compartment
- Quantity: 6
- Glove Compartment
- Removing and installing. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING, VEHICLES WITHOUT KNEE AIRBAGS .
- One Some Country Versions With Knee Airbag With Cut-Out For The Knee Airbag
- Removing And Installing, Countries With Knee Airbags. Refer To GLOVE COMPARTMENT, REMOVING AND INSTALLING, VEHICLE WITH KNEE AIRBAGS
- Spring Nut
- Brake Component
- For The Glove Compartment Lid
- With Glove Compartment Lamp Switch -E26-
- Removing and installing. Refer to GLOVE COMPARTMENT LID DAMPENING MECHANISM, REMOVING AND INSTALLING .
- Hinge Pin
- Bolt
- 3 Nm
- Bolt
- 3 Nm
- Quantity: 3 Or 5 Depending On The Equipment Level
- Mount
- For Striker Pin
- Front Passenger Airbag Deactivation Key Switch -E224-WARNING:
Follow All Safety Precautions When Working With Pyrotechnic Components. Refer to SAFETY PRECAUTIONS .
- Equipment Levels
- Removing and installing. Refer to FRONT PASSENGER AIRBAG DEACTIVATION KEY SWITCH, REMOVING AND INSTALLING .
- Bracket
- Bolt
- 3 Nm
- Glove Compartment Cover
- Removing and installing. Refer to GLOVE COMPARTMENT LID, REMOVING AND INSTALLING .
- Glove Compartment Opener
- Removing and installing. Refer to GLOVE COMPARTMENT HANDLE, REMOVING AND INSTALLING .
- Stop Buffer
- For The Glove Compartment Lid