Adjustment Overview

WARNING: This page is about a different car, the 2013 Volkswagen Beetle and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If repairs have been performed on the transmission, it is only necessary to adjust the input shaft, output shaft or differential if components have been replaced which have a direct effect on the adjustment of the transmission, refer to Table to avoid any unnecessary adjusting.

		To Be Adjusted:
		Input Shaft, Refer to INPUT SHAFT, ADJUSTING	Output Shaft, Refer to OUTPUT SHAFT, ADJUSTING	Differential, Refer to DIFFERENTIAL, ADJUSTING
Replaced Part:	Transmission Housing	x		x
	Clutch Housing	x	x	x
	Input Shaft	x
	Output Shaft		x
	Differential Housing			x
	Output Shaft Tapered Roller Bearing	x
	Output Shaft Tapered Roller Bearing		x
	Differential Tapered Roller Bearing			x
	4th Gear	x