Fastener Tightening Specifications: Notes
WARNING: This page is about a different car, the 2014 Volkswagen Beetle, 2013 Volkswagen Beetle, and 2012 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Component |
Fastener Size |
Nm |
| Axial bearing disc to cylinder block bolt |
- |
10 |
| Cable bracket to timing chain cover bolt |
- |
10 |
| Camshaft adjuster to intake camshaft bolt |
- |
60 + 90° |
| Camshaft adjustment valve 1 to cylinder head bolt |
- |
2 |
| Camshaft clamp T40070 to camshaft bolt |
- |
20 |
| Camshaft position sensor to cylinder head bolt |
- |
10 |
| Chain compartment cover to cylinder head bolt |
- |
10 |
| Coolant pipe to bracket bolt |
- |
10 |
| Coolant distribution housing to timing chain cover |
- |
10 |
| Cylinder head cover to cylinder bolt |
- |
10 |
| Double sprocket to cylinder block bolt |
- |
60 + 90° |
| Exhaust Camshaft Sprocket to Camshaft Bolt |
- |
60 + 90° |
| Flange to chain compartment cover bolt |
- |
10 |
| Intake camshaft adjuster to camshaft bolt |
- |
60 + 90° |
| Mount to cylinder block bolt |
- |
10 |
| Oil pump sprocket to oil pump bolt |
- |
20 + 90° |
| Plug to cylinder block |
- |
30 |
| Secondary air injection connecting pipe to cylinder head bolt |
- |
10 |
| Tensioning pins to cylinder block bolt |
- |
40 |
| Timing chain cover to cylinder head bolt |
- |
10 |
| Timing chain tensioner to cylinder block bolt |
- |
10 |
| Transport strap to cylinder block bolt |
- |
25 |
| Vacuum pump to control housing cover bolt |
- |
10 |
| Wire bracket to chain compartment cover bolt |
- |
10 |