Timing Chain Cover Overview: Notes

Fig 1: Identifying Assembly Overview: Timing Chain Covers

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1. O-ring
   • Always replace.
   • Coat with oil before installing.
2. Oil Dipstick Guide Tube
3. Bolt
   • 9 Nm
4. Bolt
   • 9 Nm
5. Camshaft Adjustment Valve 1 -N205-
   • Removing and installing, refer to Camshaft Adjustment Valve 1 -N205- .
6. Seal
   • Replace if damaged.
   • Coat with oil before installing.
7. Bolt
   • Tightening sequence and specification, refer to Fig 2.
8. Upper Timing Chain Cover
   • Removing and installing, refer to UPPER TIMING CHAIN COVER .
   • Tightening sequence, refer to Fig 2.
9. Gasket
   • Replace if damaged.
10. O-ring
    • Always replace.
    • Coat with oil before installing.
11. Alignment Pins
    • For centering the cover.
12. Lower Timing Chain Cover
    • Removing and installing, refer to LOWER TIMING CHAIN COVER .
13. Bolt
    • Always replace.
    • Tightening sequence and specification, refer to Figure.
14. Seal
    • For the vibration damper.
    • Removing and installing, refer to VIBRATION DAMPER SEAL .
15. Plug
    • Always replace.

Fig 2: Identifying Upper Timing Chain Cover - Tightening Sequence

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Special tools and workshop equipment required 

• Torque Wrench V.A.G 1783
• Open End Spanner Insert AF 10 V.A.G 1783/1