Data List / Active Test [10/2013 - ]
- DATA LIST NOTE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / (desired system) / Data List.
- Read the Data List according to the display on the Techstream.MAIN BODY
Tester Display Measurement Item/Range Normal Condition Diagnostic Note Trunk/BDoor Open SW Luggage door opening switch assembly signal / ON or OFF ON: Luggage door opening switch assembly on
OFF: Luggage door opening switch assembly off- Trunk Main SW Luggage door opening cancel switch (luggage door opening switch assembly) signal / ON or OFF ON: Luggage door opening cancel switch (luggage door opening switch assembly) on
OFF: Luggage door opening cancel switch (luggage door opening switch assembly) off- Luggage courtesy SW Luggage door closer assembly courtesy switch signal / ON or OFF ON: Luggage door closer assembly courtesy switch on
OFF: Luggage door closer assembly courtesy switch off- SMART KEYTester Display Measurement Item/Range Normal Condition Diagnostic Note Tr/B-Door Unlock SW Luggage electrical key switch / ON or OFF ON: Luggage electrical key switch pushed
OFF: Luggage electrical key switch not pushedWhen this item is abnormal, there is a problem with the luggage electrical key switch of the luggage compartment door lock assembly or related parts.
- ACTIVE TEST
HINT:
Using the Techstream to perform the Active Tests allows relays, VSVs and actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Enter the following menus: Body Electrical / Main Body / Active Test.
- Perform Active Test according to the display on the Techstream.MAIN BODY
Tester Display Test Part Control Range Diagnostic Note Trunk and Back-Door Open Operate luggage compartment door lock assembly latch release OFF or ON -