LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> RS 5 >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> SEAT FRAMES (2 Of 2) (COUPE) >> 72 Seat Frames >> Rear Seats >> Seat Bench/Single Seat, Removing And Installing >> Installing >> Notes

Seat Bench/Single Seat, Removing And Installing: Installing: Notes

NOTE:

The Floor Panel Into Which The Mounting Grommets Are Inserted Must Be Checked After Every Disassembly Of The Bench Seat And Be Readjusted In The Case Of Deformation.

The wire frame of the bench seat must be checked after every disassembly and be readjusted in the case of deformation.

The mounting grommets must be replaced each time the bench seat is removed.

Install In Reverse Order Of Removal. Note The Following: 

scientia non olet · About LEMON Manuals