Overview - Seat Height Adjustment Motor

Fig 1: Identifying Height Adjustment Motor Overview

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Bolts
- 10 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Quantity: 2
- Self-locking
Bracket
- Bolted with the seat pan
Seat Height Adjustment Motor
- Driver side: Driver Seat Height Adjustment Motor -V245-
- Front passenger side: Front Passenger Seat Height Adjustment Motor -V246-
- Removing and installing. Refer To SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
Bolt
CAUTION:
The Bolt Has A Left-Hand Thread.
- 18 Nm
- Self-locking
- Always replace
- Removing and Installing. Refer To SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- threaded screw holes must always be cleaned (for example, with thread cutter)
Adjusting Spindle
- Pre-adjusted by the manufacturer
- Component of the seat height adjustment motor
Bolts
- 28 Nm
- Always replace
- Quantity: 2
- Self-locking
- Threaded holes for screws must always be cleaned, for example, with thread cutter