LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 533 (3.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CCBA, CGXC & CTUB (Sedan)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Balance Shaft And Oil Pump Drive Chain

Overview - Balance Shaft And Oil Pump Drive Chain

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Balance Shaft And Oil Pump Drive Chain Overview
GWWA13-10457Courtesy of AUDI OF AMERICA, LLC
  1. Crankshaft
  2. Power Take-Off Drive Chain
  3. Drive Sprocket for Oil Pump
    • Installed position: the side with lettering on it faces the engine
  4. Bolt
    • 30 Nm +90° turn
    • Replace
  5. Pressure Spring
  6. Bolt
    • 15 Nm +90° turn
    • Replace
  7. Balance Shaft Chain Sprocket
    • Installed position: the side with lettering on it faces the transmission
  8. Chain Tensioner
    • With glide track
  9. Bolt
    • 10 Nm +45° turn
    • Replace
scientia non olet · About LEMON Manuals