Overview - Charge Air System
- Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .NOTE:
If there are small impressions on the fins. Refer to COOLER AND CONDENSER ASSEMBLY .
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
- Hose Clamp
- 5.5 Nm
- Reinforced
- Air Guide Hose
- To turbocharger
- Must be free of oil and grease before installing
- Hose Clamp
- 5.5 Nm
- Reinforced
- Hose Clamp
- 5.5 Nm
- Reinforced
- Air Guide Hose
- To the intake manifold
- Must be free of oil and grease before installing
- Hose Clamp
- 5.5 Nm
- Reinforced
- O-Ring
- Replace
- Charge Air Pressure Sensor -G31-
- Removing and installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
- Bolt
- 5 Nm
- Rubber Grommet
- Bushing
- Nut
- 9 Nm
- Rubber Grommet
- Hose Clamp
- 5.5 Nm
- Reinforced
- Air Guide Pipe
- Hose Clamp
- 5.5 Nm
- Reinforced
- Air Guide Hose
- From charge air cooler
- Must be free of oil and grease before installing
- Hose Clamp
- 5.5 Nm
- Reinforced
- Bolt
- 7 Nm
- Resonator
- Rubber Grommet
- Hose Clamp
- 5.5 Nm
- Reinforced
- Air Guide Hose
- To the resonator
- Must be free of oil and grease before installing