LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 2.0L - Turbocharger & Supercharger - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Installing

Charge Air Cooler, Removing And Installing: Installing

Install in reverse order of removal while noting the following:

NOTE:

If there are small impressions on the fins. Refer to COOLER AND CONDENSER ASSEMBLY .

NOTE:

The hose connections and charge air system hoses must be free of oil and grease before installing.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

To mount the charge hoses on their connectors securely, spray the bolts on the used clamps with rust remover before installing.

scientia non olet · About LEMON Manuals